1OPK$CUG +PUVTWEVKQP /CPWCN
displaying the OmniBase screen.
On the OmniBase select the camera from which the images want to be stored
and find the first image of the sequence that wants to be recorded. Start the
video recorder recording and press play on the OmniBase, the sequence is now
being recorded. Stop the video recorder and OmniBase when the images are
transferred to the video tape.
To improve results and increase the amount of footage recorded press Play
twice on the OmniBase, to increase the speed of the images being played back.
This typically allows a 3Hr VCR tape to store 12Hrs of OmniBase recordings.
If a VCR is used with long play recording modes typically 24Hrs of OmniBase
recordings can be stored on a 3Hr video tape.
Also using a SVHS Video recorder will give improved image quality.
2%.KPM7RNQCF
Small amounts of footage can be uploaded using PCLink software and athe
serial link cable. This upload method is slow (approx. 10kByte/second) and is
therefore only recommended for very small (e.g. 5 to 10 minutes worth) of
archiveing.
1OPK$CUG +PUVTWEVKQP /CPWCN
#FLWUVKPI(CEVQT[&GHCWNV5GVVKPIU
A new unit is supplied with no recording on the hard disk, and with factory
default settings on recording parameters. See MENU SYSTEM
in
association with on-screen HELP facility for full explanation of settings
available. From the RESET SYSTEM menu, one can reset the menu back to
its default factory state and if required clear the alarm history , and delete
any recordings on the hard disk (including write-protected images).
