1OPK$CUG +PUVTWEVKQP /CPWCN
1OPK$CUG +PUVTWEVKQP /CPWCN
EXAMPLES
If an alarm event has occurred since the unit was last operated, the bell will
ring continuously, until the user goes to the alarm history menu
(automatically from the ALARM OCCURRED message).
If a camera is disconnected from the OmniBase or the sensors have detected
motion, the external alarm system will be activated.
6KOGT/GPW
TIMER
DEFINE WORKING HOURS...
MON: >09:00 TO 17:00
TUE: 09:00 TO 17:00
WED: 09:00 TO 17:00
THU: 09:00 TO 17:00
FRI: 09:00 TO 17:00
SAT: 09:00 TO 17:00
SUN: 09:00 TO 17:00
EXIT
This is the “Timer” menu, from which the period of timer recording can be
set. It also can be used to enable / disable alarm recording.
Use the up / down buttons to choose a day, and the right / left buttons to
switch between start and finish times. Enter a time using the numbered
buttons - this will replace the previous time. To engage the timer, go to the
“Timer Recording” menu.
You must use leading zeros for the time where necessary, e.g.
09:45
.
To omit any day, leave both entries blank with NO numeric characters.
