9
8. Troubleshooting
Problem
Solution
• The luminaire
will not switch ON
Check the LUX light control setting is not set in the wrong
position according to the current light level. Adjusting
the setting (fully clockwise for day and night operation)
and test again.
Make sure the mains supply is connected correctly
(See section 6. Connection Diagram) and switched ON.
The luminaire could be faulty, replace the light fitting.
• The luminaire is
permanently ON
There is continuous movement within the
detection zone. Reduce the SENS and TIME
control setting to the minimum and test again.
• The luminaire
activates without any
noticeable movement
Make sure the unit is mounted securely so it does
not move.
Ensure that there is no movement that is not identified
i.e. behind a wall or the movement of a small object
in the immediate vicinity, if so reduce the SENS control
setting and test again.
