7
8
LUX – Light Control Setting
• The LUX control determines the level of darkness required for the unit
to start operating.
• Turn it fully anti-clockwise to select full dusk until timed OFF operation
(approx. 10 Lux).
• Turn it fully clockwise to select full daytime until timed OFF operation
(approx. 2000 Lux).
• The setting is best achieved in real time by following the procedure below;
1. Set the LUX control knob fully clockwise.
2. When the ambient light level reaches the level of darkness at which you wish
the lamp to become operative (i.e. at dusk) SLOWLY rotate the control in an
anti-clockwise direction until a point is reached where the lamp illuminates.
3. Leave the control set at this point.
• At this position the unit should become operative at approximately the same
level of darkness each evening.
• Observe the operation of the unit. If the unit is starting to operate too early
(i.e. when it is quite light) adjust the control slightly anti-clockwise.
If the unit starts to operate too late (i.e. when it is very dark).
Adjust the control slightly clockwise.
• Continue to adjust until the unit operates as desired.
