TECHNISONIC INDUSTRIES LIMITED
TDFM-9000 Installation Instructions
TiL 11RE442 Rev. D Issue 1
1
1.1
INTRODUCTION
This publication provides operating information on the TDFM-9000 airborne transceiver. The
exact configuration depends on which and how many RF modules are installed.
1.2
DESCRIPTION
The TDFM-9000 transceiver is an airborne multi-band radio capable of operation in conventional
analog and P25 digital FM systems, SmartNet/SmartZone trunking systems, and P25 9600
trunking systems. RF modules are available in single or dual bands that support VHF, UHF-LO,
UHF-HI, and 700-800 MHz bands. Up to 6 single or dual band modules can be supported.
These optional additional features include P25 9600 trunking Phase 1 and 2 that may be
combined with AES and/or DES-OFB encryption with OTAR in any of the available modules.
The TDFM-9000 is not normally frequency agile. In order to have the ability to change the
frequencies at the front panel, the FPP (front panel programming) option must be ordered for
each band. FPP is only available on the VHF and UHF modules.
1.3
MODEL VARIATION
There are several variations of the Model TDFM-9000 Transceiver. Each variation offers different
features and performance based on the type of RF modules and options installed.
RF Modules are mounted in trays of two (with up to 3 trays supported).
The following is a breakdown of the TDFM-9000 model variations:
P/N 101263-D-90-TBB-TBB-TBB-P9XXXX
(PRODUCT TYPE)-(D)-(9X)-(Tray 1)-(Tray2)-(Tray3)-(Project)
PRODUCT TYPE:
101263 = TDFM-9000 series, 3 trays, 2 – 6 modules
D= Display type:
1)
Color TFT
2)
Standard Green/NV
9X = TDFM-9000 series variant:
90 = TDFM-9000
SECTION 1: GENERAL DESCRIPTION
