TIGMON Lauben 1500AT, Руководство пользователя

Страница: 9 / 35

| 17 16 |
Cleaning and Maintenance
Cleaning the cooking pot, steamer and aluminium lid
■
Gently wash the inner aluminium pot, stainless steel steamer and aluminium lid with hot water, detergent and a sponge. Do not use
abrasive cleaners, abrasive sponges or wire brushes.
■
If food sticks to the bottom of the inner pot, allow the pot to soak and then wipe it clean.
Maintaining the inner pot
■
Use a plastic or wooden spoon. Do not use a metal spoon to avoid scratching the surface of the inner pan.
■
To protect the life of the non-stick coating as much as possible, cutting food in the inner pan is not recommended.
■
To avoid corrosion, do not pour vinegar into the inner pan.
Cleaning and maintaining the other parts of rice cooker
■
Clean the central area, sealing cover and exterior of rice cooker with a wet cloth.
■
If there is water on the electric heating plate, please wipe it dry with a cloth. If there is burnt rice, lightly polish it off with steel wool or
sandpaper.
Note:
Make sure that the device is unplugged and has cooled down before cleaning, to prevent burns.
Error Code Table
Fault Error Code Reason Solution
Bottom sensor short circuit E1 Bottom sensor short circuited
(More than 213˚C) Connect the thermistor correctly (or
return to normal temperature), power
on again
Bottom sensor open circuit E2 Bottom sensor open circuit
(Less than -27 ˚C) Connect the thermistor correctly (or
return to normal temperature), power
on again
Top sensor short circuit E3 Top sensor short circuit
(More than 213 °C) Connect the thermistor correctly (or
return to normal temperature), power
on again
Top sensor open circuit E4 Top sensor open circuit
(Less than -27 ˚C) Connect the thermistor correctly (or
return to normal temperature), power
on again
Over temperature protection E5 Bottom temperature more than 180 ˚C
(This protection point should be lower
than the fuse by 20˚C or more) Return bottom temperature to below
protection temperature, power on again
Troubleshooting
Fault Causes Solution
Nesvítí kontrolka 1. Napájecí kabel není připojen ke zdroji
elektrické energie
2. Porucha napájení
1. Check if the product is connected to a power source.
2. Wait for power.
Electric hot plate is
not heating 1. Board failure
2. Fuse blown
3. Electric hot plate Contact the company service centre.
Light is on, electric
hot plate is not
heating 1. Electric hot plate failure
2. Board failure Contact the company service centre.
Uncooked rice 1. Too much or too little being cooked
2. The ratio of rice and water is incorrect
3. The inner pot is not placed correctly
4. There is something between the inner pot
and the electric hot plate
5. Inner pot deformation
6. Board failure
7. Sensor failure
1. Adjust the total capacity of rice and water, with range from
the highest to the lowest.
2. Adjust the ratio of rice to water.
3. Rotate the inner pot left and right to return it to the correct
position.
4. Remove any foreign objects.
5. Contact the company after-sales staff to purchase a new
inner pot.
6. Contact the company service centre.
7. Contact the company service centre.
Rice boiled 1. Inner pot deformation
2. The inner pot is not placed correctly
3. Board failure
4. Sensor failure 1. Contact the company to purchase a new inner pot.
2. Rotate the inner pot left and right to return it to the correct
position.
3. Contact the company service centre.
4. Contact the company service centre.
Overflow Too much water Use less water.
LED control panel:
E1, E2, E3, E4, E5 Board failure Contact the company service centre.
Program Table with Time and Temperature
Program: Time: Temperature:
Quick Cook 35 minutes 135 ˚C
Slow Cook 45 minutes 135 ˚C
Claypot Rice 70 minutes 130 ˚C
Porridge 60 minutes 120 ˚C
Desugar 60 minutes 125 ˚C
Reheating 20 minutes 82 ˚C
Keep Warm 24 hours 72 ˚C
DE
EN
CZ
SK
PL
HU
SLO
HR
DE
EN
CZ
SK
PL
HU
SLO
HR