TIGIEFFE AIRO R Series, Руководство по эксплуатации и обслуживанию

Страница: 76 / 114

Use and Maintenance Manual - R13 R17 Series Page 76
7.3. Starter battery
The battery is one of the most important elements of the machine. It is recommended to keep it in an efficient condition to increase
its useful life, to avoid faults and to reduce the management costs of the machine.
The starter battery is for:

Powering the machine control circuits.
 Starting the heat motor.
WARNING!
Do not approach the battery with flames. Risk of deflagration due to the formation of explosive gases.
Do not carry out temporary or irregular electric connections.
The terminals must be tightened and without deposits. The cables must be provided with a good insulation.
Keep the battery cleaned, dry and free of oxidation products by using antistatic cloths.
Do not place tools or any other metal object on the battery.
7.3.1. Starter battery maintenance
The starter battery does not require any special maintenance:

Keep terminals clean by removing any oxidation residues.

Check correct terminal tightening.
In case of faulty operations due to the battery, avoid any direct intervention and call the Customer Service.
To limit automatic battery decharge during periods of inactivity store the machine in environments with
temperatures lower than a 30°C.
7.3.2. Starter battery recharge
Starter batteries do not require any recharge. Battery is charged by:
 the heat motor alternator during its normal working;
 an automatic battery charger which is activated along with the activation of the 230V single-phase pump (Optional).
WARNING!
Properly check the charge level of the starting battery.
The battery recharges automatically only if the heat motor or electric pump are activated. Leaving the control
panels active for a long time with the motor off may cause the battery to discharge.