TIGIEFFE AIRO R Series, Руководство по эксплуатации и обслуживанию

Страница: 61 / 114

Use and Maintenance Manual - R13 R17 Series Page 61
7.2. General maintenance
Below are listed the main maintenance jobs to be done and the relevant schedule (the machine features an hour meter).
Operation Frequency
Screw tightening (see paragraph "Various adjustments") After the first 10 working hours
Oil level check in hydraulic tank After the first 10 working hours
Check of the battery state (charge and liquid level) Every day
Check of deformation of tubes and cables Every week
Check of stickers and code plates Every month
Articulated joints and sliding blocks greasing Every month
Check of heat motor fixing on elastic supports Every month
Emergency devices efficiency check Every month
Electric connections check Every year
Hydraulic connections check Every year
Periodic operation check and structure visual check Every year
Screw tightening (see paragraph "Various adjustments") Every year
Check of drive reduction gear oil change Every year
Telescopic boom sliding blocks adjustments Every year
Tracks condition and tension check Every year
Pressure relief valve operation check Every year
Brake system operation check Every year
Inclinometer operation check and adjustment Every year
Operation check of Microswitch M1A Every year
MRT Microswitch operation check Every year
M2A-M2B Microswitches operation check Every year
STP1÷STP4 Microswitches operation check Every year
“Dead-man” pedal and button safety system operation check. Every year
Hydraulic filter replacement Every two years
Drive reduction gear oil change Every two years
Total oil change in hydraulic tank Every two years
As it is possible to install different types of heat motors, refer to the instructions manual of the motor
manufacturer for all maintenance operations.
TO SEND THE MACHINE TO THE MANUFACTURER WITHIN 10 YEARS OF WORK FOR A COMPLETE CHECK
BIODEGRADABLE OIL KIT
PANOLIN BIOMOT 10W40