TIGIEFFE AIRO R Series, Руководство по эксплуатации и обслуживанию

Страница: 48 / 114

Use and Maintenance Manual - R13 R17 Series Page 48
5.4. Machine start-up
To start the machine the operator shall:
 Release the stop button B located on the ground control
by rotating it of 1/4 turn clockwise;
 turn on-off key A on the ground control station to
Platform position;
 remove the starting key and hand it over to a person in
charge on ground, properly informed of the use of the
emergency controls

get onto the platform

Release the stop button P on the platform control panel
(see previous paragraphs).
If you want to use the thermic propulsion , select the
thermic power by the selector F on the control panel and
start the heat engine using switch G (see instructions in next
paragraph).
If you want to use the electric propulsion , select the
electric power by the selector F on the control panel and
start the motor using button E (see instructions in next
paragraphs).
Before using the thermic propulsion (Diesel or Petrol motor)
check the fuel level in the tank.
For those machines that are not equipped with a level gauge
on the platform control panel, this operation should be
carried out by visually checking the fuel level after
unscrewing the filler cap; for the other machines it is
possible to check the level directly through the level gauge
on the platform control panel.

Before starting the working session, when the motor is
off and sufficiently cool, visually check the fuel level.
 Keep the fuel tank and the motor clean.
For petrol motors (models “EB”) use only Unleaded Petrol
with Octane No. >87.
Fig. 17