Tiger JPB-W Series, Руководство по эксплуатации

Страница: 11 / 65

21
20
21
20
English
6
Setting the Timer
1
4
2
5 7
3
･
6
Press twice for
rinse-free rice.
Using the Timer function (Timer 1 /
Timer 2)
You can preset the time that you want cooking
to be actually completed.
• Select either “Timer 1” or “Timer 2” and set the
desired completion time. The start of cooking will
be automatically adjusted so that the operation is
completed at the preset time.
• Each timer can be set to different times. e.g.
“Timer 1” for breakfast and “Timer 2” for dinner.
• The preset timer settings will be stored in
memory.
● Example setting: If “Timer 1” is set to 13:30,
cooking will be completed at 13:30.
1
Check the present time.
• See P.44 for the procedure to set the
present time.
Blinks
Check the present time.
2
Press the [ 下一歩・ Next] or
[ 上一歩・ Back] key to select the
desired menu.
• It is not necessary to press the [
下一歩・
Next] or [
上一歩・
Back] key if the desired
menu is already selected.
Blinks
Check that the
Keep Warm
lamp is off.
Beep
3
If you selected the “Porridge”
menu, use the [ 时・ Hr] and
[ 分・ M] keys to set the desired
cooking time.
• Each time the [
时・
Hr] key is pressed, the
set time will increase by 5 minutes. Each
time the [ 分・ M] key is pressed, that time will
decrease by 5 minutes.
• The cooking time can be set to any 5-minute
increment between 40 and 90 minutes.
Increases by
5 min.
Decreases
by 5 min.
• The default setting is for 60 minutes. Adjust
as desired.
4
Select the keep-warm setting for
after cooking. (See P.16)
The keep-warm setting can be selected after
the timer setting.
5
Press the [ 预约・ Timer] key
to select either “Timer 1” or
“Timer 2”.
The selected setting will switch between
“Timer 1”, “Timer 2” and “Soak” each time the
[ 预约・ Timer] key is pressed.
• For the soak timer, see P.22.
Blinks
Display
Beep
• The previously preset time will be displayed.
It is not necessary to set the timer again if the
desired completion time is already displayed.
Note
● The Timer function is not available in the following
cases.
• When the “Quick”, “Mixed”, “Sweet”, “Slow
Cook” menu is selected
• When the preset time is less than that indicated
in the following table
Menu Minimum preset time
Eco 1 h
Plain 1 h 15 min
Sushi 1 h
Porridge Cooking time + 1 min
Brown 1 h 30 min
Brown GABA 4 h 35 min
• When “0:00” is blinking on the display
• When the inner pot is not set.
● If the Keep Warm lamp is on, press the [
取消
・ Cancel] key to turn off the lamp. (The Timer
function is not available while the Keep Warm
lamp is on.)
● Setting a long time for the timer may form darker
brown crisp rice. If this is not desired, rinse the
rice well.
● If you do not operate the rice cooker within about
30 seconds after pressing the [
预约・
Timer] key,
an alarm (3 beeps) will sound.
● If the [
预约・
Timer] or [
煮饭/免洗米・
Start/Rinse-
free] key is pressed while the rice cooker is in a
state where the Timer function is not available, an
alarm (3 beeps) will sound.
6
Use the [ 时・ Hr] and [ 分・ M] keys
to set the desired completion
time.
• The present time is displayed in a
24-hourformat.
Blinks
Beep
Press the [ 时・ Hr] key to change the set time
in 1-hour increments. Press the [
分・
M] key
to change that time in 10-minute increments.
Hold down the corresponding key to change
the time more rapidly.
Note
● Do not set the timer to more than 12 hours, as it
may result in spoiled rice.
7
Press the [ 煮饭/免洗米・ Start/
Rinse-free] key once.
When cooking rinse-free rice,
press the key twice
The Timer function is set.
On
Plain rice
Grains other than
plain rice
Beep-beep
Long
Beep
Display
When cooking rinse-free rice
(“Eco”, “Plain”, “Sushi”, and
“Porridge” only)
Display
Plain rice
Grains other than
plain rice
Beep-beep
Long
Beep
Beep
Beep
• If you make a mistake or otherwise want to
reset the timer, press the [
取消・
Cancel] key
and repeat the procedure from step
2
on
P.20.