Tiger JPB-W Series, Руководство по эксплуатации

Страница: 12 / 65

23
22
23
22
English
7
Setting the Soak Timer
3
1
4 6
2
･
5
Press twice for rinse-
free rice.
Using the Soak Timer function
You can set the time for rice to be soaked
naturally before cooking.
• Set the inner pot in the rice cooker, select “Soak
Timer”, and set the time. Cooking will start
automatically when the set time has elapsed.
• The pre-soaking time can be set in 10 minute
increments from 10 to 60 minutes.
● Example setting: If “Soak Timer” is set to 20
minutes, cooking will start after 20 minutes.
1
Press the [ 下一歩・ Next] or
[ 上一歩・ Back] key to select
the desired menu.
Blinks
Check that the
Keep Warm
lamp is off.
Beep
2
If you selected the “Porridge”
menu, use the [ 时・ Hr] and
[ 分・ M] keys to set the desired
cooking time.
• Each time the [ 时・ Hr] key is pressed, the
set time will increase by 5 minutes. Each
time the [
分・
M] key is pressed, that time will
decrease by 5 minutes.
• The cooking time can be set to any 5-minute
increment between 40 and 90 minutes.
Increases by
5 min.
Decreases
by 5 min.
• The default setting is for 60 minutes. Adjust
as desired.
3
Select the keep-warm setting for
after cooking. (See P.16)
The keep-warm setting can be selected after
the soak timer setting.
4
Press the [ 预约・ Timer] key, and
then select “Soak Timer”.
The selected setting will switch between
“Timer 1”, “Timer 2” and “Soak Timer” each
time the [
预约・
Timer] key is pressed.
• For Timer 1 and Timer 2, see P.20.
Blinks
Beep
Note
● The soak timer cannot be used under the
following conditions.
• When the “Quick”, “Mixed”, “Sweet”, “Slow
Cook” menu is selected
• When “0:00” is blinking on the display
• When the inner pot is not set.
● If the Keep Warm lamp is on, press the [ 取消
・
Cancel] key to turn off the lamp. (The Timer
function is not available while the Keep Warm
lamp is on.)
● If you do not operate the rice cooker within about
30 seconds after pressing the [ 预约・ Timer] key,
an alarm (3 beeps) will sound.
● If the [ 预约・ Timer] or [ 煮饭/免洗米・ Start/Rinse-
free] key is pressed while the rice cooker is in a
state where the Timer function is not available, an
alarm (3 beeps) will sound.
5
Press the [
时・
Hr] and [
分・
M]
keys to set the pre-soaking time.
Blinks
Beep
• The pre-soaking time can be set in 10 minute
increments from 10 to 60 minutes.
• Pressing the [
时・
Hr] key increases the
time by 10 minutes while the [ 分・ M] key
decreases it by 10 minutes.
„
Texture
Soaking rice for a long time will create a soft texture
when cooked.
6
Press the [ 煮饭/免洗米・ Start/
Rinse-free] key once.
When cooking rinse-free rice,
press the key twice
The Timer function is set.
On
Off
Display
Plain rice
Grains other than
plain rice
Beep-beep
Long
Beep
When cooking rinse-free rice
(“Eco”, “Plain”, “Sushi”, and
“Porridge” only)
Display
Plain rice
Grains other than
plain rice
Beep-beep
Long
Beep
Beep
Beep