TidalFit Premium EP-14, Руководство пользователя

Страница: 38 / 59

34
JET CARE
We recommend that you clean your jets when you drain your pool.
However, if you do need to clean your jets in between this can be
accomplished with a full pool.
1) To remove the jet inserts turn
the jet counterclockwise to the
off position until it stops.
Continue to turn the jet past the
stop point to loosen it from the
pool. The insert will now pull out.
2) Soak jet inserts in a mixture of
1 part vinegar to two parts warm
water for 2-3 hours. Periodically
rotate the spinner nozzle to
break up residue in the jets.
4) Rinse the jet inserts under warm
water.
5) To reinstall the jets insert jet into
jet body and turn clockwise until
fully seated then tug to make
sure it is seated properly. You
can then continue to turn clock-
wise until it stops.
NOTE: A jet with stainless steel escutcheons can be slippery. You
can use a soft cloth or jar- opening pad to assist in removing and
installing the jet.