TidalFit Premium EP-14, Руководство пользователя

Страница: 22 / 59

18
Temp Set (80ºF - 104ºF / 26.0ºC - 40.0ºC)
The last measured temperature is constantly displayed on the LCD. Your
pool’s set temperature range may vary from range shown above depend-
ing on your manufacturer’s settings
Note that the last measured spa temperature displayed is current
only when the pump has been running for at least 1 minute.
Warm/Cool
Press the “Warm” or “Cool” button once to display the set temperature.
Each time either button is pressed again, the set temperature will in-
crease or decrease depending on which button is pressed. After three
seconds, the LCD will automatically display the last measured spa tem-
perature.
Mode/Prog
This button is used to switch between Standard, Economy, and Sleep
modes. Press “Mode/Prog” to enter mode programming, press “Cool” to
cycle through to desired mode (LCD flashes until confirmed), then press
“Mode/Prog” to confirm selection.
Standard Mode
maintains the desired temperature. Note that the last
measured pool temperature displayed is current only when the pump has
been running for at least 1 minute. The “STANDARD” icon will display
until the mode is changed.
Economy Mode heats the pool to set temperature only during filter cy -
cles. The “ECONOMY” icon will display until mode is changed.
Pressing “Jets 1” while in Economy Mode puts the pool in Standard-
In-Economy mode , which operates the same as Standard Mode, then
reverts to Economy Mode automatically after 1 hour. Both the “STAN-
DARD” and “ECONOMY” icons display in this mode. During this time,
a press of the “Mode/Prog” button will revert to Economy Mode immedi-
ately.
Sleep mode heats the spa to within 20ºF (11ºC) of the set tempera-
ture only during filter cycles. The “SLEEP” icon will display until mode
is changed.
Standby Mode
Pressing “Warm” or “Cool” then “Jets 2” will turn off all pool functions tem-
porarily. This is helpful when changing a filter. Pressing any button resets
the pool. On some systems the “Jets 1” button will control the ...