TidalFit Premium EP-14, Руководство пользователя

Страница: 30 / 59

Diagnostic Messages cont...
Sanitizer is low.
Add sanitizer according to manufacturer’s
instructions.
Sanitizer is high.
Remove pool cover and allow sanitizer to dis-
sipate.
The pump is on during Standby Mode to assist
in draining the pool.
Press “Jets 1” to turn off the pump when water
has drained (or power off the pool.).
Hardware failure.
Contact your dealer or service organization.
Hardware failure.
Contact your dealer or service organization if
message appears on more than one power up.
Firmware install problem.
Contact your dealer or service organization if
message appears on more than one power up.
Configuration error. Pool cannot start up
Contact your dealer or service organization.
Pool could not trip GFCI.
Contact your dealer or service organization .
Continued operation may be unsafe.
A pump appears to be stuck on, causing the
water temperature to creep up, possibly to
hazardous levels.
•
•
•
•
•
•
•
•
26