ThyssenKrupp TW63B, Руководство по эксплуатации

Страница: 47 / 106

Operating manual Installation
TW63B drive
thyssenkrupp Aufzugswerke 47 Version 09/2018
3. Balance out uneven surfaces by inserting the enclosed shims.
(Balancing by means of the supplied shims)
4. Bolt the machine onto the frame, whereby the machine housing must not be
tensioned.
5. Align the rope grooves of the traction sheave and deflecting pulley in parallel.
6. Tighten the screws with the prescribed tightening torque.

Chapter 10.2
7. Plumb the rope departure on the rope pulley at the elevator car and/or mounting
on the car and counterweight.

With a horizontal rope departure, the gear box casing on the machine base frame is
to be secured against shifting by means of car steady plates.
SA9 traction sheave in the shaft, machine with extended traction sheave shaft
and pedestal bearing
.
Important: On setting up a gear drive with pedestal bearing, it must be ensured
without fail that

the compensating supports are mounted and secured according to instructions

the traction sheave shaft is aligned horizontally

the bearings of the machine and the outside bearing are exactly aligned