Installation and Operational Instructions for
ROBA-stop
®
-Z Type 892.101.0
Size 125
(E073 01 046 000 4 EN)
14/10/2013 TK/HW/SU
Chr. Mayr GmbH + Co.
KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Tel.: +49 8341 804-0, Fax: +49 8341 804-421
Page 1 of 14
www.mayr.com
, E-Mail:
Design according to
Drawing number: E073 01 046 000 1 10
Article number: 8227821
Please read these Operational Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to brake failure, resulting in damage to other parts.
These Installation and Operational Instructions (I + O) are part of the brake delivery.
Please keep them handy and near to the brake at all times.
Contents:
Page 1:
- Contents
- Safety and Guideline Signs
- Guidelines on EU Directives
Page 2:
- Safety Regulations
Page 3:
- Safety Regulations
Page 4:
- Safety Regulations
Page 5
: - Brake Illustrations
Page 6:
- Parts List
Page 7:
-
Technical Data
- Switching Times
Page 8:
- Application
- Design
- Function
- Scope of Delivery / State of Delivery
- Installation Conditions
Page 9:
- Installation
- Noise Damping
Page 10:
- Electrical Connection and Wiring
Page 11:
- Permitted Shaft Misalignments
- Shaft Alignment
Page 12:
- Braking Torque
- Brake Inspection
- Dual Circuit Brake Functional Inspection
Page 13:
- Release Monitoring
Page 14:
- Maintenance
- Disposal
- Malfunctions / Breakdowns
Safety and Guideline Signs
DANGER
Immediate and impending danger, which can
lead to severe physical injuries or to death.
CAUTION
Danger of injury to personnel and
damage to machines.
Please Observe!
Guidelines on important points.
According to German notation, decimal points
in this document are represented with a
comma (e.g. 0,5 instead of 0.5).
Guidelines on the Declaration of Conformity
A conformity evaluation has been carried out for the product (electromagnetic safety brake) in terms of the EC low voltage
directive 2006/95/EC. The Declaration of Conformity is laid out in writing in a separate document and can be requested if
required.
Guidelines on the EMC Directive (2004/108/EC)
The product cannot be operated independently according to the EMC directive.
Due to their passive state, brakes are also non-critical equipment according to the EMC.
Only after integration of the product into an overall system can this be evaluated in terms of the EMC.
For electronic equipment, the evaluation has been verified for the individual product in laboratory conditions, but not in the
overall system.
Guidelines on the Machinery Directive (2006/42/EC)
The product
is a component for installation into machines according to the machinery directive 2006/42/EC.
The brakes can fulfil the specifications for safety-related applications in coordination with other elements.
The type and scope of the required measures result from the machine risk analysis. The brake then becomes a machine
component and the machine manufacturer assesses the conformity of the safety device to the directive.
It is forbidden to start use of the product until you have ensured that the machine accords with the regulations stated in the
directive.
Guidelines on the ATEX Directive
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger of explosion.
For application of this product in areas where there is a high danger of explosion, it must be classified and marked
according to directive 94/9/EC.
Содержание TW63B
