ThyssenKrupp Drive DAB530, Руководство по эксплуатации

Страница: 49 / 86

O
PERATING MANUAL
DAB530
M
AINTENANCE
/
SERVICE
ThyssenKrupp Aufzugswerke GmbH
7.10 Checking for escaping grease / oil
Check the area around the bearing cover, brake drum, brake linings, shaft,
as well as the lower and/or inner area of the traction sheave for traces of oil.
It is not possible to see the inner area.
This means that a precise examination of the gap between the bearing
bracket and braking surface is important; it should also be checked for traces
of oil.
NOTE
Use of incorrect cleaning agent!
Damage to the break
For cleaning work on the brake, only use the cleaning agent
isopropanol (isopropyl alcohol).
Only carry out cleaning work on the brake surfaces.
Degree of soiling Procedure
No escaping oil / grease
determined Check regularly within the
framework of maintenance Every 3 months
(6 months in case of
reduced frequency,
< 50,000 runs per
year)
If a small amount of
escaping oil / grease is
determined Clean and check regularly
within the framework of
maintenance Every 3 months
(6 months in case of
reduced frequency,
< 50,000 runs per
year)
If a large amount of
escaping oil / grease is
determined or brake
disc/brake linings already
fouled with oil / grease
present Clean the drive and, if
necessary, the brake and carry
out short-term repairs.
Before continuing operation
until modification, run a brake
test. If the braking effect is
inadequate, shut down the
installation.
If necessary, check on a daily
basis whether oil / bold is still
escaping. If this is the case:
shut down the installation. Repair after 4 weeks
at the latest
49 Version 03/2017