ThyssenKrupp Drive DAB530, Руководство по эксплуатации

Страница: 37 / 86

O
PERATING MANUAL
DAB530
M
AINTENANCE
/
SERVICE
ThyssenKrupp Aufzugswerke GmbH
Relubrication
1 Lubrication nipple
2 Overflow opening
3 Setting screw for the
position of the rope pulley
4 Axle bracket
The pulley shaft has a thread Rp ¼" for the grease outlet pipe on both sides;
this is required where a tensioner device for compensating rope is used.
When relubricating:
To distribute the grease filling uniformly in the bearing, observe the following:
a)
Grease filling: Add in several partial quantities during operation! (at least 3
or in more parts)
b)
Operate the drive for at least 3 minutes between the individual filling
operations
Note:
Lubricant
must
be refilled
when the machine is running
in order to ensure
that distribution in the bearing is uniform!
Filling of uncontrolled lubricant quantities without redistribution through
bearing rotary movements may cause damage to the bearing and sealing
systems!
Use the specified lubricating grease only.
If other greases are used the:

Lubricating ability may degrade.

Grease ducts may harden.

Bearings may become damaged.
THYSSENKRUPP AUFZUGSWERKE GmbH will not be held liable for
damage resulting from the use of non-approved lubricants
3
Lubricate "on both sides"!
Fig. 7.2.2 Rope pulley
Fig. 7.2.1
Machine
1 2 1
1
2
1
2
3
4
3
3
37 Version 03/2017