ThyssenKrupp Drive DAB530, Руководство по эксплуатации, Страница: 58 / 86

O
PERATING MANUAL
DAB530
SPECIAL VERSIONS
On operating the lever, the ring should engage on the inside of the borehole
to prevent slipping.
8.2.2
Manual drive
Elevator car movement by means of manual drive.
If there is no weight difference between the car and counterweight, the
traction sheave does not move even if the brake is opened.
In this case, move the elevator car by means of the manual drive.
Note: two persons are required for elevator car movement with the manual
drive. Do not operate the manual drive with the brake closed.
Remove the cover plate (pedestal bearing AS) on the mounting borehole for
the manual drive at the front of the drive.
Push the manual drive with light turning movements into the mounting
borehole on the pedestal bearing and secure with screws.
While one person releases the shoe brakes with the brake release lever, the
second person should move the elevator car by turning the handwinding
wheel.
NB : moving the handwinding wheel can lead to the drive starting up
suddenly. The movement is to be stopped immediately by lifting the release
lever; remove the manual drive; move the elevator car into the next landing
by carefully releasing the brakes.
NB: the handwinding wheel must be removed before switching on
the motor ! No motor operation with the handwinding wheel
fitted
Fig. 8.3
Manual drive
1 Pinion
2 Securing bolt
3 Handwinding wheel
1
2 3
ThyssenKrupp Aufzugswerke GmbH
58 Version 03/2017