ThyssenKrupp Drive DAB530, Руководство по эксплуатации

Страница: 7 / 86

O
PERATING MANUAL
DAB530
S
AFETY
1.2 Safety instructions
Notes regarding the operating manual
A requirement for safe handling and non-disruptive operation of this
subassembly is knowledge of the fundamental safety regulations.
This operating manual contains the most important information that is
required to operate the assembly safely.
The operating manual, in particular the safety instructions, must be complied
with by all persons who work on this assembly.
Furthermore, the rules and regulations covering accident prevention that
apply to the installation site must be complied with.
For countries in which CSA regulations apply, the current regulations are to
be taken into account:
The applicable regulations of the latest version of the National Electrical
Code, the latest version of the ASME, Safety Code for Elevators, and the
applicable regional regulations must be observed and/or complied with when
carrying out the measures and following the instructions described in this
manual.
Obligations of the operator and/or of the installation company
The operator and/or installation company undertakes only to allow persons to
work on the subassembly who
•
are familiar with the regulations regarding work safety and accident
prevention and have been instructed in handling the subassembly.
•
have read the chapter on safety and the warnings in this operating
manual.
Note: Check the safety awareness of the personnel at regular intervals.
Obligations on the part of personnel
Persons assigned to work on subassemblies undertake before starting work
to
•
observe the regulations regarding work safety and accident prevention.
•
read the chapter on safety and the warnings in this operating manual.
Training of the personnel
Only trained and instructed qualified personnel may work on the assembly.
The responsibility of the personnel must be clearly defined for all tasks
involving commissioning, operation, servicing and repair.
ThyssenKrupp Aufzugswerke GmbH
7 Version 03/2017