Thrane&Thrane EXPLORER 122, Руководство пользователя

Страница: 29 / 50

EXPLORER 122
User Manual
98-150578-A 3-8
3.4.1 Network Interface
The Network Interface pane allows the user to set both the wired and wireless IP/subnet
mask for the terminal (Figure 3-5).
Figure 3-5. Network Interface Pane
Configure the Ethernet interface IP Address and Subnet Mask. These fields must be in dot
notation (a.b.c.d) and contain a valid IP address.
CAUTION : Modifying the IP Address and Subnet Masks can result in loss of
connectivity to the terminal. See Section 4 for more information on network
configuration settings and examples.
3.4.2 DHCP Server
There are two options for DHCP server configuration: dynamic and static (Figure 3-6).
Dynamic
Assignments
The DHCP server can be configured with a pool of IP addresses that it will lease to clients.
The Pool Start and Pool End fields are set to the start and end IP addresses. The Netmask
field is set to the subnet mask that a client should use. Each of these fields must be a valid IP
address or subnet mask in dot notation (a.b.c.d).
The lease time is the time in minutes that a lease given to a client will be valid.
Static Assignments
The DHCP server can also be configured to provide a static IP address to a particular
network device. The network device is determined by its hardware MAC address. Each time
the DHCP server gets a request from a device that matches the MAC address the assigned IP
address will be given to the device.
The Name field is the hostname of the network device that will be assigned a static IP
address. This name must not contain any white space and should consist of alphanumeric
characters, hyphens or underscores. The MAC Address field is set to the MAC address of the