Thought Technology Ltd. Procomp Infiniti Скачать руководство пользователя страница 46

Страница: 46 / 48

Warranty

The P

OMP

INFINITI system and all equipment including optional items are guaranteed to be

free from defects in material and workmanship for 1 year from the date of purchase.

In the unlikely event that repair is necessary, call Thought Technology Ltd. to receive a Return
Authorization. Then send the unit back by a traceable method--Thought Technology will not be

responsible for items not received. We will repair or replace your unit(s) free of charge.

This warranty does not apply to damage incurred through accident, alteration, or abuse, nor to

sensor damage created by static electricity. Do not use this equipment in dry, static area unless

using an anti-static mat or anti-static spray on carpeted areas.

Thought Technology may refuse to honor this warranty if the tamper-evident seal located in the

battery compartment is broken.

IMPORTANT: Remove dead batteries promptly to prevent corrosion damage.

Optional Extended Warranty

Please contact Thought Technology Ltd. for further details.

Содержание Procomp Infiniti

















































Результаты поиска

Содержание Procomp Infiniti

Отзывы:

Бренды по названию

Популярные бренды

Thought Technology Ltd. Procomp Infiniti, Руководство по оборудованию

Результаты поиска

Содержание Procomp Infiniti

Отзывы:

Бренды по названию

Популярные бренды