Thought Technology Ltd. Procomp Infiniti, Руководство по оборудованию

Страница: 37 / 48

Condition Code Summary
The ProComp Infiniti encoder communicates various conditions to the user by means of flashing
its two LEDs. The following table summarizes what these flashes mean.
Encoder Action or Mode Flash sequence Interpretation
BLUE – solid on Everything normal.
BLUE – slow flash Low battery warning: starts when 20 to 30
minutes of battery life remain.
Normal operation
(e.g. just turned on)
BLUE – fast flash 1 second, then
between 2 and 5 slow flashes
(repeated indefinitely) Internal error. Unit will not function. Return
unit for service.
Impedance Check command (hold
power switch for 3 seconds), and
ongoing Impedance Check. BLUE – off, then 2 quick flashes
(repeated indefinitely) Impedance Check mode
Self-Calibration command (hold
power switch for 10 seconds), and
ongoing Self-Calibration BLUE – off, then 3 quick flashes
(repeated while Self-Calibration
is occurring) Self-Calibration mode
BLUE – changes to steady on. Successful self-calibration Self-Calibration, at end
BLUE – fast flashing about 1
second, then steady on.
Failed self-calibration.
WHITE – Long blink (about 1
second), then flashes 1 to 10
times Compact flash recognized and ready to
record, with each flash indicating 10% of
remaining capacity (e.g. 4 flashes indicate
40%).
WHITE – Long on period (about
1 second), then no blinks Compact flash recognized, but no space left
(zero blinks)
Compact Flash – just inserted
WHITE – Fast flashing (about 1
second), then between 2 and 6
slow flashes. The entire
sequence is repeated 3 times. Compact Flash Error, as follows:
2 flashes: internal error. Return unit for
service on Compact Flash function.
3 flashes: Compact Flash detected but not
recognized.
4 flashes: Compact Flash not properly
formatted. Try reformatting Compact Flash.
5 flashes: Compact Flash format not
supported. Format Compact Flash under an
earlier format version, or upgrade encoder
firmware.
6 flashes: inconsistent format data in
Compact Flash. Try reformatting Compact
Flash.
Compact Flash Record Command
(hold power switch until white
LED turns on, about 2 seconds). WHITE – turns on and stays on
as long as button is pressed,
then flashes 1 to 10 times. Recording in process. Each flash indicates
10% of remaining capacity (e.g. 4 flashes
indicate 40%)
37