searching for kinks. If you do find a break, the optic fibers may be too damaged to let the light
pass properly. Using a sharp, carpet cutter type blade, you can slice the FO cable into shorter,
unkinked bits. We do not recommend using scissors because they make a V-shaped cut that may
impede the data stream.
TT-USB And Encoder Connections
The FO connector on the ProComp Infiniti and the TT-
USB Interface are susceptible to breaking when they
are hit directly. This can occur if the ProComp Infiniti is
dropped on the floor. Whenever possible, fasten the
device to the client or to a chair, using the belt clip. On
the TT-USB Interface, you will also notice a hole
labeled Switch. This plug is for connecting external
devices, such as a muscle stimulation device, when you
want to use the switch control feedback option in the
software.
The TT-USB receives the data from the ProComp Infiniti encoder via the fiber optic and sends it
on to the computer via the USB port. It has four connectors;
1.
Fiber Optic Connector – Connects to Fiber Optic Cable from encoder.
2.
Mini USB Connector – Connects via USB cable to computer.
3.
Switch Connector – Connects via a 3.5mm jack acts as a computer controlled switch.
4.
Sync Connector – Connects to optional sync cable to connect more than one TT-USB
interface together to synchronize data between units. This input can also be used as an
event input.
ProComp Infiniti Hardware Manual
20
Содержание Procomp Infiniti
Страница 2: ...ProComp Infiniti Hardware Manual 2...
