THORLABS GAN1x1 Series Скачать руководство пользователя страница 5

Страница: 5 / 80

SD-OCT Base Unit

Chapter 1: Introduction

Rev C, June 25, 2021

Page 1

Chapter 1

Introduction

ATTENTION

Please read the instruction manual carefully before operating the OCT base unit. All statements

regarding safety and technical specifications will only apply when the unit is operated correctly.

This equipment is intended for laboratory use only and is not certified for medical applications,

including but not limited to life support situations.

Refer to this manual whenever the following symbols are encountered on the OCT base unit:

Attention symbol indicates that additional information is available in this manual.

Laser Safety symbol indicates that laser radiation is present.

This manual describes the SD-OCT base units of the Telesto and Ganymede Series.

If not otherwise specified, the base units of the Telesto-PS Series are incorporated in the Telesto Series.

ATTENTION

Check the supply voltage of the system before plugging in the computer. Make sure the included

power cords for the base unit, computer, and monitor are connected to a properly grounded

outlet (100 – 240 VAC; 50 – 60 Hz).

Transportation and delivery may cause the OCT base unit to be warm or cool upon receipt.

Please wait for the system to reach room temperature before attempting to operate.

Operate this system on a flat, dry, and stable surface only.

WARRANTY WARNING

Do not open the base unit, imaging scanner or PC. There are no user serviceable parts in this

product. Opening the device will void your warranty. Any modification or servicing of this

system by unqualified personnel renders Thorlabs free of any liability. This device can only be

returned when packed into the complete original packaging, including all foam packing inserts.

If necessary, ask for replacement packaging.

The following symbols are used on the device:

"ON" (power)

"OFF" (power)

Stand-by

Protective earth; protective ground

Содержание GAN1x1 Series

















































































Результаты поиска

Содержание GAN1x1 Series

Отзывы:

Бренды по названию

Популярные бренды

THORLABS GAN1x1 Series, Руководство пользователя

Результаты поиска

Содержание GAN1x1 Series

Отзывы:

Бренды по названию

Популярные бренды