THORLABS GAN1x1 Series, Руководство пользователя

Страница: 13 / 80

SD-OCT Base Unit Chapter 2: Setup
Rev C, June 25, 2021 Page 9
7) Attach the electric connection cable to the imaging scanner. (Note: The electrical and fiber cables of
the OCTH scanner are fixed to the scanner unit)
Align the red dot of the plug to the alignment mark of the electric connection port of the scanner
(shown here: OCTG).
Figure 6 Plugging the Electric Connector into the Scanner
Figure 7 Electric Connector Plugged into the Scanner
Push the connector into the receptacle until you hear a “click” sound, indicating that the connector is locked.
Red Dot
Alignment Mark