6
NanoTrak Autoalignment Controller
3.2 Front Panel Controls and Indicators
Fig. 3.1 Front panel controls and indicators
Power LED
– Indicates that power is applied to the unit.
Channel 1 and Channel 2 buttons
– Used to enable/disable channel functionality.
The associated LED is lit when the channel is enabled. Disabling channels on
NanoTrak controllers sends their respective HV outputs to zero volts.
3.3 Rear Panel Connections
Fig. 3.2 Rear panel connections
Power
CHANNEL ENABLE
1
2
apt
NanoTrak Controller
SIG IN
SIG OUT
OPTICAL/PIN I/P
PIEZO IN
PIEZO IN
HV OUT
HV OUT
USB
VERTICAL
HORIZONTAL
USER I/O
bonding point
LV OUT
EXT IN
LV OUT
EXT IN
TRIG. OUT
TRIG. IN
POWER
100 - 240 VAC, 47 - 63 Hz, 250 VA
FUSES F1 and F2: T 3.15A, ANTISURGE CERAMIC
!
