1.2 Safety
LDC2xx / page 3
1.2 Safety
Attention
All statements regarding safety of operation and technical data in
this instruction manual will only apply when the unit is operated
correctly.
Before applying power to your LDC2xx system, make sure that the
protective conductor of the 3 conductor mains power cord is cor-
rectly connected to the protective earth contact of the socket outlet!
Improper grounding can cause electric shock with damages to your
health or even death!
Also make sure that the line voltage setting marked on the rear panel
agrees with your local supply and that the corresponding fuses are
inserted. If not, please have a service technician change the voltage
(see section 5.2).
Changing of the mains fuse can be done by the customer (see
section 5.3, Replacing the mains fuse)
The unit must not be operated in explosion endangered environ-
ments!
Laser and photodiodes must only be connected with duly shielded
connection cables.
Only with written consent from Thorlabs GmbH may changes to
single components be carried out or components not supplied by
Thorlabs GmbH be used.
This precision device is only dispatchable if duly packed into the
complete original packaging including the plastic form parts. If
necessary, ask for a replacement package.
