THOR RIDGE Скачать руководство пользователя страница 15

Страница: 15 / 40

www.THORav.us | [email protected] | (763) 999-4253

THOR AV products must be used in accordance with local, state, federal and industry regulations. In

addition to this, THOR AV is not responsible for any rigging, attachments and accessories provided by

third party manufacturers.

INTENDED USE

The RIDGE series LED panels are for indoor applications only. Installations require professionally trained

personnel.

Do not use this product near water or damp environments. Do not expose the unit to direct sun light or

heating units as the internal components’ temperature may rise and shorten the life of the components.

Provide for proper airflow around product. Do not install near products that produce high levels of heat.

INSPECT PRODUCT

Inspect all products and perform safety related checks before deployment. Heed all warnings and

precautions in this manual and notices marked on the product.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they connect to the product. Do not use the unit if the electrical power cord is frayed

or broken.

INSTALLATION GUIDELINES

The responsibility to evaluate the reliability of any rigging or mounting method for their application is

solely the user’s responsibility. Rigging is to be carried out by experienced professionals. Abide by the

Working Load Limit (WLL) of third party equipment for suspension points, chain hoists and additional

rigging hardware.

Verify structural integrity meets engineering requirements for flying, ground stacking and wall mounting

applications. Utilize safety measures at all times, including safety slings and cables.

IMPORTANT SAFETY CONSIDERATIONS

Содержание RIDGE









































Результаты поиска

Содержание RIDGE

Отзывы:

Бренды по названию

Популярные бренды

THOR RIDGE, Руководство пользователя

Результаты поиска

Содержание RIDGE

Отзывы:

Бренды по названию

Популярные бренды