THOMSON Chipper Check II, Руководство пользователя

Страница: 18 / 38

18
1. Remove AC power from the instrument by disconnecting the AC power cord.
2. Click on the “Dead set” button in the main screen of the Chipper Check software.
3. Select the correct TV chassis for the instrument being tested and click on the OK
button. This brings up Chipper Check Version 1.93.
4. Click on the OK button to open the Customer File Information.
5. Click on the OK button to bring up the setup screen with a Dead Set button.
6. Click on the Dead Set button to open up the chassis selection buttons.
7. Select the appropriate chassis button
8. Connect the adapter to the instrument chassis
9. Plug in the TV.
10. Click OK and Chipper Check software will read the error codes stored in the chassis
EPROM and display them.
Dead Set
If the set will not start up, the EEPROM error code information can still be obtained by Chipper
Check. The EEPROM may also be tested for proper hardware operation, but keep in mind
that even if the EEPROM is OK, the software information contained in it may be corrupt.