THOMAS DÖRR TD 3000L M14, Руководство по эксплуатации

Страница: 3 / 18

Page 3 of 18
1. General Information
1.1 Introduction
This instruction manual contains useful information on the use and service of the cutlery polisher and must be read
thoroughly before the machine is put into operation.
Requirements for operating and maintenance personnel
Anyone working on or with the machine, whether its initial start-up, installation, operation, or maintenance is required to
read and understand this operating instructions manual. Especially the chapter on “safety” which is listed ahead.
Only sufficiently trained personnel are elligeable to operate the machine.
► Always keep this manual within reach
► Observe all safety precautions and indications
► When passing on the machine to any other persons be sure to hand over this instruction manual with it
1.2 Explanations
1.2.1 Meaning of safety indications
Symbol Signal term Meaning Result if ignored
WARNING!
Possible dangerous situation
Death or serious injury
CAUTION! Injury
CAUTION! Possible property damage
Slight or heavy damage to the
machine
No signal term Useful tips and indications none
1.3 Delivery Contents
1 x
cutlery polishing machine
1 x operation instructions manual
1 x instruction sheet for easy machine operation (place near polishing machine)
1 x granulate replacement chart