7
Operation
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.2 Operating controls on the device
Press
[Mode]
to activate the main menu and select an operating mode. Use
[Setup]
to select
further options. Use
[Up]
and
[Down]
to change the respectively displayed value. When the dis‐
play shows the desired value, press
[MODE]
.
If you do not press any buttons for about ten seconds, the display will be blanked. It will be
reactivated to display the previously called menu by pressing any button.
The set values are retained even when the device is disconnected from the mains power
supply.
Operation
Quad Par Profile 5x8W RGBW 5x8W RGB WW
35
Содержание Stairville Quad Par Profile
