thomann Stairville Quad Par Profile, Руководство пользователя

Страница: 38 / 68

This setting is only relevant if the device is being controlled via DMX.
Press
[Mode] until the display shows ‘d.xxx’ .
Now you can set the number of the first DMX channel used by the device (DMX address). Use
[Up] and [Down] to select a value between 1 and 512 (display shows ‘d.001’ … ‘d.512’ ).
Make sure this number matches the configuration of your DMX controller. The following table
shows the highest possible DMX address for the different DMX modes.
Mode Highest possible DMX address
4-channel 509
6-channel 507
8-channel 505
Press [Setup] . Using [Up] and [Down] you can now select one of the following DMX modes:
n
‘4-ch’ (four channels)
n
‘6-ch’ (six channels)
n
‘8-ch’ (eight channels)
DMX mode
Operation
LED PAR
38