thomann Stairville Quad Par Profile, Руководство пользователя

Страница: 36 / 68

A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting takes effect only when
the device is not operated under DMX control.
Press
[Mode] repeatedly until the display shows ‘Pr.xx’ . Now you can select one of the preprog‐
rammed automatic shows. Use [Up] and [Down] to select a value between ‘Pr.01’ and ‘Pr.10’ .
Settings for programme 01:
For
‘Pr.01’ , you can choose from 13 predefined colours or blackout. Press [Setup] . With [Up] and
[Down] your can now select one of the colours (display ‘1.__r’ to ‘13.on’ ) or blackout (display
‘0.OFF’ ).
To adjust the strobe frequency, press [Setup] again. The display shows ‘FS.xx’ . Now use [Up]
and [Down] to select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Settings for programmes 02 to 10:
To adjust the programme speed, press again
[Setup] . The display shows ‘SP.xx’ . Using [Up] and
[Down] you can now select a value between ‘SP.01’ (slow) and ‘SP.FL’ (fast).
To adjust the strobe frequency, press [Setup] again. The display shows ‘FS.xx’ . Now use [Up]
and [Down] to select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Operating mode ‘Preprog‐
rammed automatic show’
Operation
LED PAR
36