thomann StairVille DMX-Master 3-FX, Руководство пользователя

Страница: 72 / 104

To assign DMX channels to both jog wheels Pan and Tilt for rotation and inclination, proceed
as follows:
1.
To enter ‘Setup Mode’, hold [Setup] down for three seconds.
2.
Select ‘Pan’ or ‘Tilt’ .
3. Press the [Fixture] buttons of those DMX devices, that you want to be affected by the
changes.
4. Use the [Scene] buttons, to assign a rotation or inclination channel. The display shows
either ‘Channel pan XY’ (i.e., channel xy is being assigned to jog wheel Pan) or ‘Channel
Tilt XY’ (i.e., channel xy is being assigned to jog wheel Tilt).
5.
Use [PAGE] to toggle between channels 1…8 and 9…16.
6.
If necessary, repeat steps 2 to 5 for further connected DMX devices.
7. Press [Record] to save, otherwise your changes are currently effective, but won't be
applied permanently, though.
ð
The corresponding control LEDs flash three times briefly to confirm.
8.
To return to ‘Play Mode’, hold [Setup] down for three seconds.
Configuring jog wheels
Operating
DMX-controller
72