thomann StairVille DMX-Master 3-FX, Руководство пользователя

Страница: 62 / 104

With this function, the settings of a preset effect can be changed.
1.
To enter ‘Program Mode’, hold [Program] down for three seconds.
2.
Press [FX Editor] .
ð
The control LEDs of the effect buttons light up.
3.
Press the [Fixture] buttons of those DMX devices that you want to be affected by the
changes.
4.
Press the effect button of the effect that you want to change.
5. Use the sliders FX Speed and FX Size to adjust speed and size of the effect.
With |
[Up] or | [Down] you can change the default angle for rotation and tilt in steps
of 45° (see similar function Ä ‘Wave motion with the ‘Create Wave’ button’ on page 59 and
Ä
‘Random function with the ‘Randomize’ button’ on page 61
).
6.
With the other sliders you can change DMX values, also while the Effects Generator is
opened. The values set here for rotation and tilt become the basis for the effect.
Use
[PAGE] to toggle between channels 1…8 and 9…16.
7. If necessary, repeat steps 3 to 6 for further DMX devices connected.
8.
If you want to reverse the changes you have made for the selected DMX devices, press
[FX Clear] .
Changing an effect
Operating
DMX-controller
62