thomann StairVille DMX-Master 3-FX, Руководство пользователя

Страница: 66 / 104

To set up the cross-fade for a DMX channel, proceed as follows:
1.
To enter ‘Setup Mode’, hold the [Program] down for three seconds.
2.
Use the | [Up] or | [Down] buttons to select the menu item ‘Fadetime’ . Now you can
change the channels for cross-fades.
3.
Press the [Fixture] buttons of those DMX devices, that you want to be affected by the
changes.
4. Use the [Scene] buttons, to turn individual channels on or off. The display shows either
‘CHxx: ON’ (i.e., the cross-fade will be assigned to channel xx) or ‘CHxx: OFF’ (i.e., channel
xx is not affected by the cross-fade).
5. Use [PAGE] to toggle between channels 1…8 and 9…16.
6.
If necessary, repeat steps 3 to 5 for further connected DMX devices.
7.
Press [Record] to save, otherwise your changes are currently effective, but won't be
applied permanently, though.
8. To return to ‘Play Mode’, hold [Setup] down for three seconds.
9. Use the slider Fade Time to set the cross-fade time.
Setting up and storing channels
for cross-fades
Operating
DMX-controller
66