thomann StairVille DMX-Master 3-FX Скачать руководство пользователя страница 7

Страница: 7 / 104

Safety instructions

This device is intended to be used to control spot lights, dimmers, light effects, moving heads

or other DMX-controlled devices. Use the device only as described in this user manual. Any

other use or use under other operating conditions is considered to be improper and may result

in personal injury or property damage. No liability will be assumed for damages resulting from

improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual

abilities and having corresponding knowledge and experience. Other persons may use this

device only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

Safety instructions

DMX-Master 3-FX

Содержание StairVille DMX-Master 3-FX









































































































Результаты поиска

Содержание StairVille DMX-Master 3-FX

Отзывы:

Бренды по названию

Популярные бренды

thomann StairVille DMX-Master 3-FX, Руководство пользователя

Результаты поиска

Содержание StairVille DMX-Master 3-FX

Отзывы:

Бренды по названию

Популярные бренды