thomann Stairville Beam Moving Head B5R, Руководство пользователя

Страница: 33 / 44

WARNING!
Danger of burns and eye injuries caused by high light intensity
The light source used in this device produces visible and invisible light
beams of high intensity.
Never look directly into the light source.
Do not use the device when covers, shieldings, lenses or other optical
components are missing or damaged. In particular, avoid prolonged
direct exposure of the skin during maintenance without adequate cover
of the light source.
CAUTION!
Danger of injury in case of inappropriate handling of the illuminant
After the specified lifetime of the used illuminant there is an increased
risk of explosion.
Replace the illuminant in time, latest at the end of rated average life‐
time.
When replacing the illuminant, all safety instructions for handling light
sources must be observed and wear suitable protective gloves and
safety glasses.
NOTICE!
Possible damages due to dirt or finger prints
Due to the high temperatures, even smallest pieces of dirt on the bulb
can destroy the lamp when it is turned on.
Do not touch the lamp directly with your fingers. Use clean gloves or a
clean lint-free tissue.
NOTICE!
Possible damages due to wrong type of lamp
Any attempt to use the device with a lamp other than those specified in
this manual can result in severe damages to the device.
Only use a lamp of the specified type.
The device may only be operated with an illuminant of the type ‘Philips MSD Plat‐
inum 5R’ for use in stage and theatre area. Observe the safety instructions of the illu‐
minant manufacturer.
n Phillips screwdriver size PH1
n
Allen key size SW 3
n
Flat pliers
Notes on the illuminant
Required tools
Maintenance
Beam Moving Head B5R
33