thomann Stairville Beam Moving Head B5R, Руководство пользователя

Страница: 21 / 44

Press [E] to open up the main menu. Then use the arrow buttons to select the menu
item ‘5.Settings’ . Press [E] . Now use the arrow buttons to select the menu item
‘2.Display’ . Press [E] . Now use the arrow buttons to select the menu item
‘1.Brightness’ . Press [E] . Use the arrow keys to select a value between 5 and 100.
Once the display shows the desired value, press [E] to save this setting and to close
the submenu. To close the menu without saving the changes, press [S] or wait one
minute.
Press [E] to open up the main menu. Then use the arrow buttons to select the menu
item ‘5.Settings’ . Press [E] . Now use the arrow buttons to select the menu item
‘2.Display’ . Press [E] . Use the arrow buttons to select the menu item ‘2.Light Mode’ .
Press [E] . Use the arrow buttons to select the option ‘Light Keep’ (display is perma‐
nently lit), ‘Light Low’ (display is permanently dimmed) or ‘Light Off’ (display is
dimmed after an adjustable time). Confirm the selection with [E] .
Press [S] to exit the submenu or wait one minute.
Press [E] to open up the main menu. Then use the arrow buttons to select the menu
item ‘5.Settings’ . Press [E] . Now use the arrow buttons to select the menu item
‘2.Display’ . Press [E] . Use the arrow buttons to select the menu item ‘3.Light time’ .
Press [E] . Use the arrow keys to select a value between 5 and 60 seconds. If the dis‐
play mode is set to ‘Off’ , the display is automatically dimmed after the set time.
Once the display shows the desired value, press [E] to save this setting and to close
the submenu. To close the menu without saving the changes, press [S] or wait one
minute.
To reverse the display (for example when flying), press both arrow buttons briefly at
the same time. Alternatively, you can also use the corresponding menu item:
Press
[E] to open up the main menu. Then use the arrow buttons to select the menu
item ‘5.Settings’ . Press [E] . Now use the arrow buttons to select the menu item
‘2.Display’ . Press [E] . Use the arrow buttons to select the menu item ‘4.Disp Inversion’ .
Press [E] . Use the arrow buttons to select the option ‘ON’ (display reversed) or ‘OFF’
(display in normal direction). Confirm the selection with [E] .
Once the display shows the desired value, press [E] to save this setting and to close
the submenu. To close the menu without saving the changes, press [S] or wait one
minute.
If the display is shown inverted, the function of the keys
[E] and [S] is reversed.
Press [E] to open up the main menu. Then use the arrow buttons to select the menu
item ‘5.Settings’ . Press [E] . Now use the arrow buttons to select the menu item
‘3.Factory Set’ . Use the arrow buttons to select the option ‘Confirm’ and press again
[E] .
Press [E] to open up the main menu. Then use the arrow buttons to select the menu
item ‘6.Manual Control’ . Press [E] . Now use the arrow buttons to select the menu item
‘1.Lamp On Or Off’ . Press [E] . Use the arrow buttons to select the option ‘Lamp On’ or
‘Lamp Off’ . Confirm the selection with [E] .
Display brightness
Display mode
Display turn-off time
Display reversal
Reset to factory defaults
Lamp strike
Operating
Beam Moving Head B5R
21