thomann Stairville Beam Moving Head B5R, Руководство пользователя

Страница: 14 / 44

5 Starting up
Create all connections while the device is off. Use the shortest possible high-quality
cables for all connections. Take care when running the cables to prevent tripping
hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or
another DMX device. Connect the output of the first DMX device to the input of the
second one, and so on to form a daisy chain. Always ensure that the output of the
last DMX device in the daisy chain is terminated with a resistor (110 Ω,
¼
W).
When the unit and the DMX controller are in operation, the display shows the set
DMX address continuously. This shows that a DMX signal is received at the input. If
this is not the case, the set DMX address flashes on the display.
The two locking lever for rotation and inclination serve as transport safety device and
protect the device from accidental movements. Lock both levers before you disas‐
semble or transport the unit or when performing maintenance. Loosen both levers
before turning on the device.
Connections in DMX mode
DMX indicator
Locking lever
Starting up
moving head
14