thomann Stairville Beam Moving Head B5R, Руководство пользователя

Страница: 17 / 44

7 Operating
7.1 Starting the device
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce
very bright light. This is also valid immediately after you turn on the
device, when the device operates in automatic mode or under remote
control and when you turn off a DMX controller that is connected to the
device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure
that nobody stays close to the device. If work has to be performed in the
area of movement or in the near vicinity of the device, it must remain
turned off.
Loosen the locking levers for rotation and tilt.
Connect the device to the power supply to start operation. After a few seconds, the
fans start to work, the head moves to the home positions for rotation (pan) and incli‐
nation (tilt). After a few more seconds, the device operates in the last set mode. The
last set DMX address appears in the display. About one minute after turning on the
light source lights with full brightness.
7.2 Main menu
Press [E] to activate the main menu. Use the arrow keys to select a submenu. When
the display shows the desired submenu press [E] to open it up. To close the main
menu, press [S] or wait ten seconds.
All previously made settings are retained even when you disconnect the device from
the power grid. To restart with default values, use the ‘RESET’ function.
Press [E] to open up the main menu. Then use the arrow buttons to select the menu
item ‘1.DMX AddressSet’ . Press [E] . Use the arrow keys to select a value between 1 and
512. Use [E] to jump to the next digit of the numeric value.
Once the display shows the desired value, press [E] to save this setting and to close
the submenu. To close the menu without saving the changes, press [S] or wait one
minute.
Make sure that the DMX address matches the configuration of your DMX controller.
DMX address
Operating
Beam Moving Head B5R
17