Thinklogical SCS160, Руководство по эксплуатации продукта

Страница: 69 / 90

S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K , J u l y , 2 0 1 3 Page 69
Command: &V Display Current Settings
Values: n/a
Description: Displays the active modem settings.
Command: &W
n
Store Current Configuration
Values:
n
= 0 or 1
Default: 1
Description: &W0 Stores current modem settings in non-volatile memory and causes them to be loaded at
power-on or following the ATZ command instead of the factory defaults. See &F command.
&W1 Clears user default settings from non-volatile memory and causes the factory defaults to
be loaded at power-on or following the ATZ command.
Command: &Zy
= x
Store Dialing Command
Values:
y
= 0–2 (0–1SMI-Parallel {internal})
x = Dialing command
Default: None
Description: Stores dialing command
x
in memory location
y.
Dial the stored number using the command
ATDS=y. See Also the #CBS command, a callback security command.
Command: \An Select Maximum MNP Block Size
Values: n = 0, 1, 2, or 3
Default: 3
Description: \A0 64-character maximum
\A1 128-character maximum
\A2 192-character maximum
\A3 256-character maximum
Command: \Bn Transmit Break
Values: n = 0–9 in 100 ms units
Default: 3
Description: In non-error-correction mode only, sends a break signal of the specified length to a remote modem.
Works in conjunction with the \K command.
Command: \Kn Break Control
Values: n = 0–5
Default: 5
Description: Controls the modem's response to a break received from: computer, remote modem, or \B
command. Response is different for each of three different states.
Data mode. Modem receives the break from the computer:
\K0
Enter online command mode, no break sent to the remote modem.
\K1 Clear data buffers and send break to the remote modem.
\K2 Same as \K0.
\K3 Send break immediately to the remote modem.
\K4 Same as \K0.
\K5 Send break to the remote modem in sequence with the
transmitted data.
Data mode. Modem receives the break from the remote
modem:
\K0
Clear data buffers and send break to the computer.
\K1 Same as \K0.
\K2 Send break immediately to the computer.
\K3 Same as \K2.
\K4 Send break to the computer in sequence with the received data.
\K5 Same as \K4.
Online command mode. Modem receives a \Bn command from the computer:
\K0 Clear data buffers and send break to the remote modem.
\K1 Same as \K0.
\K2 Send break immediately to the remote modem.
\K3 Same as \K2.
\K5Same as \K4. \K4 Send break to the remote modem in sequence with the transmitted data.