S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K , J u l y , 2 0 1 3
Page 40
sftp
Use
sftp
for a secure file transfer transaction between two servers using
ssh
. This process
is similar to
ftp
except that it is encrypted for security. Refer to the
man
pages for
sftp
for
a description and any command options.
ssh
The SCS systems use
ssh
to establish secure connections over your network. The
configuration file for the ssh server is
/etc/ssh/sshd_config
.
This controls ssh
connections to the SCS.
Use
ssh
to establish a secure connection between two hosts or to transfer files or data between
the systems. The Secure Console Server is a client device and will be connected to an ssh
elsewhere. The security keys for
ssh
may need to be generated using
ssh-keygen
, depending
on your application of
ssh
. Refer to the
man
pages for
ssh
for a description and any command
options.
ssh-keygen
Use
ssh-keygen
to create keys for users so passwords do not have to be used for
ssh
login.
You can generate the security keys for your client system (in this case, the SCS is the client) to
interact with an
ssh
host elsewhere. After the keys have been generated, the user can establish a
secure shell connection using
ssh
over a network. Refer to the
man
pages for
ssh
for a
description and any command options.
stty
Use
stty
to change the configuration for each Port. The system provides a default
configuration for the system Ports (
ttyB1
through
ttyB48
),
and for the console port
(ttyS0
).
!
Note: Port changes made using
stty
are temporary (not written to memory). In
order to keep any changes, you must edit the configuration file in
/etc/rc.d/rc.serial
and then run
save
.
The Ports are identified as
/dev/ttyB1
through
/dev/ttyB48
for ports 1 through 48,
respectively, and
/dev/ttyS0
for the console port.
!
Note: For example, to administer Port 7 you would edit the file
rc.serial
and use
stty -F /dev/ttyB7
.
Refer to the
man
pages for
stty
for a description and any command options.
versions
Use
versions
to see a listing of the release versions of the LSI files in the SCS.
