www.mythinkcar.com
THINKTOOL Pros+/Pro
22
3.5.8 Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computer
WRPRUHDFFXUDWHO\GLDJQRVHHQJLQHPLV¿UHV,IJHDUOHDUQLQJLVQRWSHUIRUPHGIRUDFDUHTXLSSHGZLWK
Delphi engine, the MIL turns on after the engine is started. The diagnostic device detects the DTC P1336
'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.
$IWHUJHDUOHDUQLQJLVVXFFHVVIXOWKH0,/WXUQVRႇ$IWHUWKHHQJLQH(&8FUDQNVKDIWSRVLWLRQVHQVRURU
FUDQNVKDIWÀ\ZKHHOLVUHSODFHGRUWKH'7&JHDUQRWOHDUQHGLVSUHVHQWJHDUOHDUQLQJPXVWEHSHUIRUPHG
3.5.9 IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must be
SHUIRUPHGVRWKDWWKHLPPRELOL]HUFRQWUROV\VWHPRQWKHFDULGHQWL¿HVDQGDXWKRUL]HVUHPRWHFRQWURONH\V
to normally use the car. When the ignition switch key, ignition switch, combined instrument panel, ECU,
BCM, or remote control battery is replaced, anti-theft key matching must be performed.
3.5.10 Injector Coding
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so
as to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,
injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify
injectors to accurately control fuel injection.
3.5.11 TPMS Reset
After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function
PXVWEHSHUIRUPHGWRUHVHWWLUHSUHVVXUHDQGWXUQRႇWKHWLUHSUHVVXUH0,/7LUHSUHVVXUHUHVHWWLQJPXVW
be performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tire
pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, and
tire is replaced for the car with tire pressure monitoring function.
3.5.12 Suspension Matching
This function can adjust the height of the body. When replacing the body height sensor in the air
suspension system, or control module or when the vehicle level is incorrect, you need to perform this
function to adjust the body height sensor for level calibration.
3.5.13 AFS Reset
This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the
adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust
the headlamp lighting angle while monitoring the vehicle speed and body posture.
