www.mythinkcar.com
THINKTOOL Pros+/Pros
23
3.5.14 A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is
GLVDVVHPEOHGRUUHSDLUHGDIWHUVRPHRIWKHFDUEDWWHU\LVSRZHUHGRႇLWZLOOOHDGWRVKLIWGHOD\RULPSDFW
problem. In this case, this function needs to be done so that the gearbox can automatically compensate
according to the driving conditions so as to achieve more comfortable and better shift quality.
3.5.15 Sunroof Initialization
7KLVIXQFWLRQFDQVHWWKHVXQURRIORFNRႇFORVHGZKHQLWUDLQVVOLGLQJWLOWLQJVXQURRIPHPRU\IXQFWLRQ
temperature threshold outside the car etc.
3.5.16 EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
3.5.17 ODO Reset
a) ODO reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a car
diagnostic computer and data cable, so that the odometer shows the actual mileage.
b) Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do ODO reset after maintenance.
3.5.18 Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collides
and the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator
lights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable,
it is required that all new accessories must be replaced, but after performing this function, the data of the
airbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and the
airbag computer can continue to use.
3.5.19 Transport Mode
In order to reduce power consumption, the following functions may be disabled, including limiting the
vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At this
time, the transport mode needs to be deactivated to restore the vehicle to normal.
3.5.20 A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
3.5.21 Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in
ECU (provided that the vehicle has a hidden function and supported by hardware).
