www.mythinkcar.com
THINKTOOL Pros+/Pros
15
The indicator 1/X shown stands for the current data stream not fully displayed. Swipe the screen from
the bottom to the top, to read the remaining parts. There are 3 types of display modes available for data
viewing, allowing you to view various types of parameters in the most suitable way.
[Graph]
: Displays the parameters in waveform graphs.
[Value]
: This is the default mode which displays the parameters in values and shows in list format. (note: If
the value of data stream read is not within the standard value range, the data stream is shown in red).
[Combine]
7KLVRSWLRQLVPRVWO\XVHGLQJUDSKPHUJHVWDWXVIRUGDWDFRPSDULVRQ1RWHGLႇHUHQWLWHPV
DUHPDUNHGLQGLႇHUHQWFRORUV
On-screen Buttons:
[Graph]
Displays the parameters of the selected data stream in waveform. On the data stream
waveform page, you can do the following:
[Combine]: Displayed in graph merge status for data comparison.
[Value]: Displayed the parameters in values and shown in list format.
[Customize]: Customize the data stream option to be viewed. Tap the button, a pull-
down list of the data stream items appears on the screen. Select the desired items (max
12 items), and then screen will display the waveforms corresponding to these items
immediately. If need to remove any items, just deselect them.
