www.mythinkcar.com
THINKTOOL Pros+/Pro
6
1.7 Printer Installation
The printer is installed on the back of the main unit. Please follow the steps below:
(1) Unscrew the backplane screws and remove the host backplane.
(2) Insert the main unit card slot into one side of the printer.
(3) Press the buckle on the side of the printer to snap on it into the host.
(4) When the main unit is on, it will automatically identify and connect the printer
.
2. Introduction
3URGXFW3UR¿OH
THINKTOOL Pros+, based on the Android 10 System, is a new generation of modular high-end
programming intelligent diagnostic equipment developed by THINKCAR. With new VCI, it supports
Programming function on Mercedes-Benz, BMW, Volkswagen, Audi, Nissan, Ford, GM and other models.
THINKTOOL Pros+ adopt a unique modular design to meet various application scenarios, including
diagnostic module, printer, videoscope, work light, thermal imager, scope box, moduledock and TPMS tool.
A
Opel, Volkswagen, Audi
B
Honda
C
Volkswagen
D
Opel, Volkswagen, Citroen
E
Changan
F
Hyundai, Daewoo, Kia, Honda, Toyota, Nissan,Mitsubishi,
Renault, Opel, BMW, Mercedes-Benz, Mazda, Volkswagen,
Audi, GM, Chrysler,Peugeot, Regal, Beijing Jeep, Citroen and
most prevailing models
