Just Right!
TMX-200225
2021 ThingsMatrix Inc. Confidential Information. All Rights Reserved.
position
information
Motion: 60" will cause the device to report data every
60 minutes in Motion Mode.
Report Interval
on Static
Time
interval of
position
information
Unit: minute. The default value is 720.
For example, setting the parameter " Report Interval on
Static: 720" will cause the device to report data every
720 minutes in Static Mode.
Schedule Mode Settings
Fixed Wakeup
Time 1
Wakeup
Time 1
Parameter format: "HH: mm". For example, setup
"wakeup_time1" to be 08:00, the device will wake up at
08:00 and report data.
Fixed Wakeup
Time 2
Wakeup
Time 2
Parameter format: "HH: mm". For example, setup
"wakeup_time2" to be 12:30, the device will wake up at
12:30 and report data.
Fixed Wakeup
Time 3
Wakeup
Time 3
Parameter format: "HH: mm". For example, setup
"wakeup_time3" to be 16:00, the device will wake up at
16:00 and report data.
Fixed Wakeup
Time 4
Wakeup
Time 4
Parameter format: HH: mm; For example, setup
"wakeup_time4" to be 20:30, the device will wake up at
20:30 and report data.
Timezone
Timezone
Set the time zone according to the current device
location. For example, set parameter "time zone: UTC
+08:00", which means the device is in the time zone of
UTC +08:00.
Firmware Settings
Server
Server
Default: ftp.thingsmatrix.io
Port
Port
Default: 21
Version
Version
Default: v1.0
3.4 Periodic Mode
3.4.1 Introduction
In Periodic Mode the device can only report data in fixed intervals. It can be used if
there are no specific requirements.
3.4.2 Configuration Example
If the device is required to wake up every 10 minutes, Periodic Mode can be
configured as follows:
