Just Right!
TMX-200225
2021 ThingsMatrix Inc. Confidential Information. All Rights Reserved.
2.3.3 Position Monitor
The Position Monitor feature is enabled by default, which means the TMX09 will
report the location information every 24 hours. The information includes: Position
fix technology (LBS/GPS), longitude and latitude, Cellular Signal Strength, number of
GPS satellites, battery voltage, Cell ID, etc. All the device information reported is
displayed on the Platform.
For further information, please refer to
Assets Management Service - Device List
section in ThingsMatrix Service Platform User Guide.
2.3.4 AGPS
The AGPS enhances the performance of GPS by reducing the time-to-fix and by
improving the positioning accuracy, assisted by the carrier signal. The TMX09 uses
the GPRS signal to achieve this feature and it is enabled by default.
The GPS data is displayed on the Platform. Please refer to
Assets Management
Service - Device List
section in ThingsMatrix Service Platform User Guide to get
additional information.
2.3.5 LBS
The LBS provides the location information by utilizing the carrier network signal. It
is enabled when the TMX09 does not have GPS location information. Please note
that LBS is largely dependent on distance to surrounding network cell sites, which
could be up to a few miles away in worst case scenarios. It is not as accurate as GPS.
This feature is enabled by default. The LBS data is displayed on the Platform. Please
refer to
Assets Management Service - Device List
section in ThingsMatrix Service
Platform User Guide to get further information.
2.3.6 Blind Zone Compensation
In sleep mode, when the device enters a GPRS blind zone (limited or no cellular
coverage), it will store the collected data according to the preconfigured reporting
frequency and will upload this data to the Platform once the GPRS signal is
recovered. The maximum number of blind zone compensation data reports is 16.
This feature is enabled by default on the Platform.
2.3.7 Battery Level Detection
The device will upload the battery level status together with the location
coordinates. The battery level will be displayed on the Platform.
The device, by default, reports power information without any additional
configuration on the Platform. The battery level information is displayed on the
Platform. Please refer to
Assets Management Service - Device List
section in
